View SKY73025_9020654.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 1 preliminary data sheet SKY73025: 2300 C 2700 mhz high gain and linearity diversity downconversion mixer applications ? 2g/3g base station transceivers: ? gsm/edge, cdma, umts/wcdma ? wifi (802.11) ? wimax (802.16) ? 3gpp long-term evolution ? land mobile radio ? wireless local loop ? high performance radio links ? private mobile radio features ? operating frequency range: 2300 to 2700 mhz ? if frequency range: 50 to 500 mhz ? conversion gain: 8.6 db ? input ip3: +23.5 dbm ? output ip3: +32.1 dbm ? noise figure: 9.8 db ? integrated lo drivers ? integrated low loss rf baluns ? high linearity if amplifiers ? on-chip spdt lo switch (greater than 45 db lo-to-lo isolation) ? small, mcm (36-pin, 6 x 6 mm) pb-free package (msl3, 260 c per jedec j-std-020) skyworks offers lead (pb)-free rohs (restriction of hazardous substances) compliant packaging. description the SKY73025 is a fully integrated diversity mixer that includes local oscillator (lo) drivers, an lo switch, high linearity mixers, and large dynamic range intermediate frequency (if) amplifiers. low loss rf baluns have also been included to reduce design complications and lower system cost. the SKY73025 features an input ip3 of +23.5 dbm and a noise figure (nf) of 9.8 db, making the device an ideal solution for high dynamic range systems such as 2g/3g base station receivers. the lo switch provides more than 45 db of isolation between lo inputs and supports the switching time required for gsm/edge base stations. the SKY73025 is manufactured using a robust silicon bicmos process and has been designed for optimum long-term reliability. the SKY73025 diversity downconversion mixer is provided in a compact, 36-pin 6 x 6 mm multi-chip module (mcm). a functional block diagram is shown in figure 1. the pin configuration and package are shown in figure 2. signal pin assignments and functional pin descriptions are provided in table 1. s64 3 rfa rfb ifb+ rifb ifbC v cc_ifb vcc_lo lo1 lo2 lo_sel ifa+ rifa ifaC vcc_ifa vcc_lo figure 1. SKY73025 block diagram
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 2 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c s646 27 26 25 24 23 22 21 20 19 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 36 35 34 33 32 31 30 29 28 nc rfa v cc_lo gnd v cc_lo gnd nc rfb v cc_rfb nc gnd ifb+ ifbC nc vcc_ifb rifb nc vcc_rf a nc gnd ifaC ifa+ nc vcc_ifa rifa nc gnd gnd lo2 gnd gnd gnd lo_sel gnd lo1 vcc_lo figure 2. SKY73025 pinout C 36-pin mcm table 1. SKY73025 signal descriptions pin # name description pin # name description 1 rfa channel a rf input 19 lo1 local oscillator 1 input 2 nc no connect 20 gnd ground 3 gnd ground 21 vcc_lo dc supply, +5 v 4 vcc_lo dc supply, +5 v 22 gnd ground 5 gnd ground 23 lo_sel local oscillator select switch control 6 vcc_lo dc supply, +5 v 24 gnd ground 7 gnd ground 25 gnd ground 8 nc no connect 26 gnd ground 9 rfb channel b rf input 27 lo2 local oscillator 2 input 10 vcc_rfb channel b rf dc supply, +5 v 28 nc no connect 11 nc no connect 29 rifa channel a if bias adjust 12 gnd ground 30 vcc_ifa channel a if dc supply, +5 v 13 ifb+ positive channel b if output 31 nc no connect 14 ifbC negative channel b if output 32 ifa+ positive channel a if output 15 nc no connect 33 ifaC negative channel a if output 16 vcc_ifb channel b if dc supply, +5 v 34 gnd ground 17 rifb channel b if bias adjust 35 nc no connect 18 nc no connect 36 vcc_rfa channel a rf dc supply, +5 v
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 3 functional description the SKY73025 is a high gain diversity mixer, optimized for base station receiver applications. the device consists of two diversity channels (a and b), each consisting of a low loss rf balun, high linearity passive mixer, and a low noise if amplifier. two lo amplifiers (independent of channels a and b) are also included that allow the SKY73025 to connect directly to the output of a voltage controlled oscillator (vco). this eliminates the extra gain stages needed by most discrete passive mixers. a single pole, double throw (spdt) switch has been included to select between two different lo inputs for frequency hopping applications (i.e., gsm). rf baluns and passive mixer the rf baluns provide a single ended input, which can easily be matched to 50 ? using a simple external matching circuit. the rf baluns offer very low loss, and excellent amplitude and phase balance. the high linearity SKY73025 is a passive, double balanced mixer that provides a very low conversion loss and an excellent 3 rd order input intercept point (iip3). additionally, the balanced nature of the mixer provides for high port-to-port isolation. lo buffers and spdt lo switch the lo buffers allow the input power of the SKY73025 to be in the range of 6 dbm. the lo section is optimized for low-side lo injection. however, each of the two los can be driven over a wide frequency range with only slight degradation in performance. a high isolation spdt switch allows the SKY73025 to be used for frequency hopping applications. this switch provides greater than 45 db of lo1 to lo2 isolation: lo_sel input lo path selected high lo1 (pin 19) enabled low lo2 (pin 27) enabled for applications that do not require frequency hopping, lo_sel is fixed to one state and the appropriate lo input is used. an internal pull-down resistor enables the lo2 input. if amplifier the SKY73025 includes high dynamic range if amplifiers that follow the passive mixers in the signal path. the outputs require a supply voltage connection using inductive chokes. these choke inductors should be high-q and have the ability to handle 200 ma or greater. a simple matching network allows the output ports to be matched to a balanced 200 ? impedance. the if amplifiers are optimized for if frequencies between 50 and 500 mhz. the if amplifiers can be operated outside of this range, but with a slight degradation in performance. the rifa and rifb pins (29 and 17, respectively) can be connected to external resistors (r1 and r2 C see figure 3) to reduce the if amplifier bias current. when a resistor is connected to pin 29 (r2), the channel a if amplifier current is reduced. when a resistor is connected to pin 17 (r1), the channel b if amplifier current is reduced. the total amount of current reduced for channel a and b if amplifiers is the amount of mixer current that is reduced. table 2 shows the change in channel a and/or b amplifier current from using either of three different external resistors. for example, if a 10 k ? resistor is used on pin 29 and a 5.1 k ? resistor is used on pin 17, the channel a if amplifier current is reduced by 7 ma and the channel b if amplifier current is reduced by 14 ma. the total mixer current is reduced by 21 ma (7 ma + 14 ma). note that the use of any external resistors on either of these two pins also degrades iip3 performance. skyworks recommends using external resistors no smaller than 1 k ? . electrical and mechanical specifications the absolute maximum ratings of the SKY73025 are provided in table 3 and the recommended operating conditions in table 4. electrical characteristics for the SKY73025 are provided in table 5.
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 4 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c table 2. if amplifier bias current adjustment external resistor connected to pin 17 and/or pin 29 (k ? ) channel a and/or channel b if amplifier bias current change (ma) no external resistor 0 10 C7 5.1 C14 2.2 C33 note : the resistor values listed here were those tested. other resist or values can be used with similar reductions in bias current. table 3. SKY73025 absolute maximum ratings parameter symbol minimum maximum units supply voltage, +5 v vcc 4.5 5.5 v supply current i cc 440 ma rf input power p rf +20 dbm lo input power p lo +20 dbm operating case temperature t c C40 +85 c junction temperature t j +150 c storage case temperature t stg C40 +125 c notes: exposure to maximum rating conditions for extended periods may reduce device reliability. there is no damage to device with on ly one parameter set at the limit and all other parameters set at or below their nominal value. nominal thermal resistance (juncti on to center ground pad) is 5.1 c/w. table 4. SKY73025 recommended operating conditions parameter symbol minimum typical maximum units supply voltage, +5 v (vcc1 C vcc7) vcc 4.75 5.00 5.25 v supply current i cc 375 ma lo input power p lo C6 0 +6 dbm lo select input: high low lo_sel h lo_sel l 2.2 0.8 v v operating case temperature t c C40 +85 c rf frequency range f rf 2300 2700 mhz lo frequency range (note 1) f lo 1800 2600 mhz if frequency range f if 50 500 mhz note 1 : the SKY73025 has been optimized for low-side lo injection. howeve r, the lo can be used outside of the specified frequency ran ge with degraded performance.
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 5 table 5. SKY73025 electrical specifications (voltage supply = +5 v, t c = +25 c, lo = 0 dbm, rf frequency = 2570 mhz, if frequency = 450 mhz, lo frequency = 2120 mhz, unless otherwise noted) parameter symbol test condi tion min typical max units conversion gain g 8.6 db noise figure nf 9.8 db noise figure with a blocker signal nf blk blocking signal input power = +8 dbm 25 db third order input intercept point iip3 f rf = 2570 mhz and 2570.8 mhz, p rf = C10 dbm/tone +23.5 dbm third order output intercept point oip3 f rf = 2570 mhz and 2570.8 mhz, p rf = C10 dbm/tone +32.1 dbm 2rf C 2lo 2x2 p rf = C10 dbm C62 dbc 3rf C 3lo 3x3 p rf = C10 dbm C73 dbc input 1 db compression point ip1db +12.3 dbm output 1 db compression point op1db +19.9 dbm lo1-to-lo2 isolation 45 db channel-to-channel isolation 25 db rf-to if-isolation 30 db lo leakage: @ rf port @ if port C30 C20 dbm dbm lo_sel input C20 150 250 a lo switching time 0.5 s rf port input return loss z in _ rf with external matching components 14 db lo port input return loss z in _ lo with external matching components 14 db if port input return loss z out _ if with external matching components 14 db
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 6 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c application circuit design considerations rf input and if output matching for best performance, rf and if matching circuits are needed either for a differential output application or for a single-ended output application. a typical single-ended output application circuit is shown in figure 3. the 200 differential if output impedance could be used to connect to a differential input surface acoustic wave (saw) filter or variable gain amplifier (vga). a 4:1 balun transformer could also be used to match the impedance to 50 for a single-ended output application. as noted in figure 3, components c1, c2, l1, l2, l3, and l4 are rf matching components; c8, c10, l9, and l10 are if matching components; t1 and t2 are 4:1 if baluns. if bias resistor components r1 and r2 (see figure 3) are for the if amplifier bias current adjustment. to operate the SKY73025 as specified in tables 4 and 5, these resistors are not required. pcb layout the following design considerations are general in nature and must be followed regardless of final use or configuration. 1. paths to ground should be made as short and as low impedance as possible. 2. the ground pad of the SKY73025 provides critical electrical and thermal functionality. this pad is the main thermal conduit for heat dissipation. since the circuit board acts as the heat sink, it must shunt as much heat as possible from the device. therefore, design the connection to the ground pad to dissipate the maximum heat produced by the circuit board. for more information on soldering the SKY73025, refer to the package and handling information section of this data sheet. dc power supply 1. skyworks recommends including external bypass capacitors on the vcc voltage inputs of the device. place the bypass capacitors close to the vcc supply pins. 2. components l5, l6, l7, and l8 (see figure 3) are high-q, low loss inductors. these inductors must be able to pass currents in excess of 200 ma dc. evaluation board description the SKY73025 evaluation board is used to test the performance of the SKY73025 downconversion mixer. an assembly drawing for the evaluation board is shown in figure 4 and the layer detail is provided in figure 5. a schematic diagram for the SKY73025 evaluation board is shown in figure 6.
preliminary data sheet ? SKY73025 skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 7 rfb vcc_rfb gnd nc ifb+ ifbC nc vcc_ifb rifb vcc_rfa gnd nc ifa+ ifaC nc vcc_ifa rifa nc vcc_lo nc gnd vcc_lo gnd gnd nc rfa lo1 gnd gnd vcc_lo gnd lo_sel gnd gnd lo2 l3 1 nh 1 2 3 4 5 6 7 8 9 27 26 25 24 23 22 21 20 19 10 11 12 13 14 15 16 17 18 36 35 34 33 32 31 30 29 28 c3 33 pf c1 1.6 pf vcc l7 470 nh l8 470 nh c10 5.6 pf c11 33 pf c12 12 pf l1 2.7 nh l4 1 nh c2 1.6 pf l2 2.7 nh t1 db714 vcc vcc channel a rf input x x x nc x x x x x vcc channel a if output c9 33 pf r1 (see table 2) c5 1 f c14 33 pf c13 1 f c7 33 pf l9 12 nh c6 1 f c4 33 pf c8 5.6 pf l10 12 nh t2 db714 l5 470 nh l6 470 nh r2 (see table 2) s1134 SKY73025 local osc 2 input local osc 1 input channel b if output local osc select channel b rf input figure 3. typical single-ended application circuit
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 8 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c s1008 j4 j9 j5 j8 j3 j1 j7 j6 j10 c34 l16 l17 r4 c32 c38 c2 l2 c1 c3 c4 l1 l3 c5 l4 c8 c7 c6 l14 l15 r5 r2 c33 c39 c27 c26 c25 c22 j2 l11 c24 c20 c21 c18 l10 c19 c17 r1 r6 l6 c11 l8 l9 c16 c15 c37 c36 l18 r3 l19 t1 l5 c41 c12 c40 c14 c13 c23 t2 c29 c28 l12 l13 c35 figure 4. SKY73025 evaluation board assembly diagram
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 9 s100 9 layer 1: top C metal layer 2: ground layer 3: power plane layer 4: solid ground plane figure 5. SKY73025 evaluation board layer detail
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 10 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c rfb vcc_rfb gnd nc ifb+ ifbC nc vcc_ifb rifb vcc_rfa gnd nc ifa+ ifaC nc vcc_ifa rifa nc vcc_lo nc gnd vcc_lo gnd gnd nc rfa lo1 gnd gnd vcc_lo gnd lo_sel gnd gnd lo2 j4 c1 1 nh 1 2 3 4 5 6 7 8 9 27 26 25 24 23 22 21 20 19 10 11 12 13 14 15 16 17 18 36 35 34 33 32 31 30 29 28 c3 1.6 pf c2 dni l2 2.7 nh l1 0 c5 33 pf c4 dni j7 c8 1 nh c6 dni vcc vcc c7 1.6 pf c12 dni c11 dni l4 2.7 nh l5 470 nh l8 5.6 pf l6 470 nh l3 0 l9 0 c15 dni c16 12 nh c19 dni c18 dni c17 33 pf c22 12 pf c37 dni c36 dni j6 t1 db714 vcc vcc x x x nc x x x x x l10 0 j3 vcc vcc vcc vcc c25 dni c24 dni c23 33 pf l11 0 j8 j2 j10 l19 dni r1 dni r6 dni l18 dni r3 0 c32 dni c33 dni c13 1 f c21 33 pf element jumper c20 1 f c14 33 pf c26 1 f c27 33 pf c35 dni c34 dni c29 dni c28 12 nh j9 t2 db714 vcc j5 l17 dni l16 dni l13 5.6 pf l14 470 nh l15 470 nh l12 0 r2 dni r5 dni r4 0 s1007 note: the evaluation board can be converted to provide a differential output by removing components t1, t2, r3, and r4. some component labels may be different than the corresponding component symbol shown here. component values, however, are accurate as of the date of this data sheet. SKY73025 figure 6. SKY73025 evaluation board schematic
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 11 package dimensions the pcb footprint for the SKY73025 is provided in figure 7. figure 8 shows the package dimensions for the 36-pin mcm, and figure 9 provides the tape and reel dimensions. package and handling information since the device package is sensitive to moisture absorption, it is baked and vacuum packed before shipping. instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. the SKY73025 is rated to moisture sensitivity level 3 (msl3) at 260 c. it can be used for lead or lead-free soldering. for additional information, refer to the skyworks application note, pcb design & smt assembly/rework guidelines for mcm-l packages , document number 101752. care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. production quantities of this product are shipped in a standard tape and reel format. for packaging details, refer to the skyworks application note, tape and reel , document number 101568. electrostatic discharge (esd) sensitivity the SKY73025 is a static-sensitive electronic device. do not operate or store near strong electrostatic fields. take proper esd precautions.
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 12 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c s1125 stencil aperture top view metallization top view solder mask opening top view 6.3 0.15 0.05 0.75 0.85 0.25 0.35 0.05 6.3 16x 0.5 16x 0.5 8x 0.075 8x 0.075 8x 0.65 8x 0.65 0.5 pitch typ stencil aperture size for center ground pads should be 80% to 100% (by area) of the solder mask opening of the package. component outline component outlin e smt pad detail scale: 2x 9x this rotation 9x rotated 180 o 9x rotated 90 o cw 9x rotated 90 o ccw stencil and metallization soldermask opening all measurements are in millimeters 2x 2.795 thermal via array. ? 0.3 mm on 0.5 mm pitch. additional vias in common ground pad will improve thermal performance note: thermal vias should be tented and filled with solder mask, 30-35 m cu plating recommended. note: the cross-hatched area represents the merger of the center ground pad +9 individual i/o ground pads. all i/o ground pads should have at least one via connected to internal ground planes for optimum electrical performance. pin 1 component outline component outline 6.4 6.3 2x 2.795 4 4 0.25 around ground pins 6.4 6.3 3.8 1.9 3.8 1.9 figure 7. pcb layout footprint for the SKY73025 6 x 6 mm mcm
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 13 all measurements are in millimeters pads are solder mask defined on one edge and metal defined on three edges. dimensioning and tolerancing according to asme y14.5m-1994 s689_a 6 6 pin 1 indicator metal pad edge 1.1 0.1 0.4 0.05 0.5 0.1 (0.1) side view b bottom view a detail a detail d top view pin 36 pin 1 pin 1 indicator (see detail d) 0.25 0.05 18x 2.9 0.2 x 0.2 solder mask opening 36x smt pad 0.15 a b c 0.2 a b c 0.15 a b c c a 0.1 4x 2 4x 2 2x 1.9 2x 1.9 18x 2.9 3x r0.2 4x 1.5 4x 1.5 4x 1 4x 1 4x 0.5 4x 0.5 figure 8. SKY73025 36-pin mcm package dimensions
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 14 september 21, 2007 ? skyworks proprietar y and confidential information ? produc ts and product inform ation are subject to change without notice ? 200691c c1222 notes: 1. carrier tape: black conductive polystyrene 2. cover tape material: transparent conductive psa 3. cover tape size: 9.3 mm width 4. all dimensions are in millimeters a b 2.00 0.05 ? 1.55 0.05 0.30 0.05 5 o max. 5 o max. 6.30 1.75 0.10 ? 1.50 min. 5.50 0.05 8.00 4.00 a b b a 1.70 12.00 0.30 6.30 pin #1 indicator figure 9. SKY73025 tape and reel dimensions
preliminary data sheet ? SKY73025 downconversion mixer skyworks solutions, inc. ? phone [ 781] 376-3000 ? fax [781] 376-3100 ? sales@ skyworksinc.com ? www.skyworksinc.com 200691c ? skyworks proprietary and confiden tial information ? produc ts and product information ar e subject to change witho ut notice ? september 21, 2007 15 ordering information model name manufacturing part numb er evaluation kit part number SKY73025 downconversion mixer SKY73025-11 (pb-free package) copyright ? 2007 skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyw orks solutions, inc. (skyworks) products or services. these m aterials, including the information co ntained herein, are provided by skyworks as a service to its customers and may be used for info rmational purposes only by the cu stomer. skyworks assumes no res ponsibility for errors or omissions in these materials or the information contained herein. skyworks may change its documentat ion, products, services, specific ations or product descriptions at any time, without notice. sk yworks makes no commitment to update the materials or information and shall have no responsi bility whatsoever for conflicts, incompatibilities, or other diff iculties arising from any future changes. no license, whether express, implied, by es toppel or otherwise, is granted to any in tellectual property rights by this document . skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, re production or use of skyworks products, information or mate rials, except as may be provided in skyworks terms and conditions of sale. the materials, products and information are pr ovided as is without warranty of any ki nd, whether express, implied, statutory, or otherwise, including fitness for a particular purpose or use, merchantability, performance, qualit y or non-infringement of any intellectual property right; all su ch warranties are hereby expressly disclaimed. skyworks does not warrant the accura cy or completeness of the information, text, graphics or other items contained within these ma terials. skyworks shall not be liable for any damages, including but not limited to any special, indirect, incidental, statutory, or consequentia l damages, including without limitation, lost revenues or lost profits that may result from the use of the materials or information, wheth er or not the recipient of mat erials has been advised of the possibility of such damage. skyworks products are no t intended for use in medical, lifesaving or life-su staining applications, or other equipment in which the failure of the skyworks products could lead to personal injury, death, physical or environmental damage. skyw orks customers using or selli ng skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. customers are responsible for their products and applications us ing skyworks products , which may deviate from published specifi cations as a result of design de fects, errors, or operation of products outside of published pa rameters or design specifications. customers sh ould include design and operating safeguards to minimize these and other risks. skyworks assumes no liability for applications assistance, customer product de sign, or damage to any equipment resulting from the use of skyw orks products outsid e of stated published specifications or parameters. skyworks, the skyworks symbol, a nd breakthrough simplicity are trademarks or registered tradem arks of skyworks solutions, inc ., in the united states and othe r countries. third-party brands and names are for identification purposes only, and are the proper ty of their respective owners. additional information, includ ing relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SKY73025

	To Download SKY73025 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .